Walkthrough
Can you disable the Mullvad kill switch in Windows
No. According to Mullvad's technical documentation, the built-in kill switch in the Mullvad VPN app for Windows is always active, and there is no separate setting to disable it. To get online without the VPN, turn off Lockdown mode in VPN settings if it is enabled, then click Disconnect. If Lockdown mode is off, the Disconnected state does not block normal traffic. By default, this mode is already off, and disabling it does not stop the built-in kill switch from working. All you need is a computer running Windows with the Mullvad VPN client installed.
5 minutesRevised From VPN for Devices
The separate WireGuard app for Windows works differently. According to Mullvad's help pages, its Block untunneled traffic (kill-switch) toggle is switched off via the Edit button. This instruction does not apply to the Mullvad VPN app. Mullvad does not advise keeping this protection disabled permanently: IP address or DNS leaks are possible.
What exactly blocks traffic in Mullvad
| Situation | Action in Mullvad | Reason |
|---|---|---|
| Internet needed after deliberately disconnecting the VPN | Turn off Lockdown mode if it is enabled, then click Disconnect | With Lockdown mode off, blocking rules are not applied in the Disconnected state |
| Blocking needed even after Disconnect | Enable Lockdown mode | Lockdown mode keeps blocking in the Disconnected state |
| Protection needed when the server changes or the tunnel drops | Do nothing: the built-in kill switch is always active | Built-in protection blocks leaks of unencrypted traffic |
Mullvad has two levels of protection. The built-in kill switch engages when the server changes and when the tunnel drops unexpectedly. Lockdown mode extends blocking to the Disconnected state as well. The app enters this state in only two cases: when the service starts and after you press Disconnect or Cancel yourself.
| Option | Disabling the kill switch | Internet after manually disconnecting the VPN | Mechanism in Windows |
|---|---|---|---|
| Mullvad VPN | The built-in kill switch cannot be disabled | Works if Lockdown mode is off | Windows Filtering Platform, with rules changed atomically |
| Proton VPN Advanced kill switch | Kill Switch Off or switching to the standard Kill Switch On | Blocked while Advanced is enabled | Windows Filtering Platform |
The data in the table comes from the Mullvad and Proton VPN documentation.
Windows Filtering Platform (WFP) is a mechanism built into Windows for filtering network traffic. Mullvad changes its rules within it atomically, that is, in a single step. Therefore, when switching between states, there is no gap during which traffic passes without a filter. In blocking states, only the Mullvad service and the tool for sending reports may contact Mullvad's API server.
Restoring internet after disconnecting Mullvad
According to Acciyo, the Lockdown mode toggle is located in the VPN settings section of the Mullvad app.
- Open the Mullvad VPN app and go to VPN settings.
- If Lockdown mode is enabled, turn it off.
- Click Disconnect on the main screen.
The app then enters the Disconnected state without blocking. The built-in kill switch remains in force and will trigger again on the next connection.
For example: after a trip, the laptop does not go online even after Disconnect. In VPN settings, Lockdown mode turns out to be enabled. It is switched off, and internet returns immediately.
If there is no internet even after Disconnect
- Lockdown mode has stayed enabled. Turn it off in VPN settings.
- The app shows BLOCKING INTERNET, and the padlock icon in the system tray is green with a red dot. This means the VPN connection failed and the built-in kill switch has engaged. Click Disconnect or connect to a different server.
The catch. If the installer failed to close the app during an update, internet may remain blocked. Do not end Mullvad VPN through Task Manager: the block may persist that way. Use the Troubleshooting section of Mullvad's guide to installing on Windows.
If you also need information about Mullvad's clients for other systems, see the breakdown on whether Mullvad VPN officially supports Linux and Android.
Comparing Proton's Advanced kill switch with Mullvad's protection
In behaviour, Proton VPN's Advanced kill switch matches Mullvad with Lockdown mode enabled. According to Proton VPN's help pages, it lets internet through only when connected to Proton VPN. Blocking persists both after manually disconnecting the VPN and after a system restart. This restart information cannot be carried over to Mullvad: Mullvad's documentation contains no such detail.
Both services use Windows Filtering Platform. Proton's blog clarifies that permanent filters direct outgoing internet connections through the VPN interface.
The main difference is in controlling the protection. With Proton, the kill switch can be switched off completely (Kill Switch Off) or set to the standard mode (Kill Switch On). With Mullvad, only Lockdown mode can be disabled, and the built-in protection is always on.
CitadelVPN and connection protection in Windows
A short checklist for Windows
- Do not look for Mullvad's built-in kill switch: it cannot be disabled.
- For internet without the VPN, turn off Lockdown mode in VPN settings, then click Disconnect.
- For blocking even without a connection, enable Lockdown mode.
- If an update hangs, do not close Mullvad through Task Manager.